2000t Swaging Press

2000t Swaging Press

2000t Swaging Press

Suitable for the following ferrules:

Aluminium ferrules up to XL 64 (Multibite XL 72)
Flemish Eye ferrules up to 102 (4″)

Your benefits:

Down Stroke – workpiece remains in position during swaging
Automatic Control – shorter cycle time (piston return starts automatically)
Stroke Limit – shorter cycle time (limitation of piston return)

Optional Equipment

Rigging Arm

Video

Our hydraulic swaging press in use

This video demonstrates working with our 4,000t swager. It illustrates the fundamental principle of swaging an aluminium ferrule. This includes an example of a wire rope sling with a thimble. This fundamental finishing process applies to our entire swager programme. The rigging arm shown is very helpful for all wire ropes with diameters above 38mm. It saves time, is safe and ergonomic. The rigging arm is available for all our swaging machines above 1,000t

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.