The wire rope cutting and annealing machines Type 1224, 1225 and 1226, are intended for separating wire ropes in the diameters 4-30, 8-40 and 12-60 mm, enabling the ends of the wire rope to be conically tapered.
Your benefits:
Fast, central clamping of wire ropes from 8-40 mm in diameter without changing the jaw
Short annealing time thanks to special transformer
Simple operation
Easy adjustment of tapered length thanks to fine adjustment of clamping jaw clearance
The video demonstrates working with our Type 1224 annealing machine. It illustrates the fundamental principle of separating a wire rope with a cutting and annealing machine. Depending on the wire rope diameter and the desired tapered end length the clearance between the clamping jaws is set before clamping the wire rope. Press the foot pedal to start the current flow, and the rope starts to glow. The wire rope is now slowly turned according to its lay direction and simultaneously pulled apart. The result is a professional looking tapered end on both sides of the rope. The fundamental work process applies to our entire annealing machine programme Type 1224-1226.
Related products
ZEN® 13411-3
2,5 - 60 Ø mm, Aluminium
600t
One Column Swager
Type 1224
4-30 mm
800t
Two Column Swager
Type 1226
12-60 mm
You are currently viewing a placeholder content from Elfsight. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
